How does a 0-10V dimmer work?
0-10v dimming is a lighting control method that—on direct current voltage (DC) between 0 and 10 volts—can produce varying light intensity levels. At 0 volts, the light will dim to its minimum light level, though typically requires a switch to turn the lights completely off.
Do I have to use 0-10V dimming?
The 0-10V minimum current requirement also ensures that you can do long runs of wires that are thin in diameter and cost less. Easy to use, diagnose, and understand, you will run into very few complications with the use of 0-10V dimming.
Do you need special Dimmer for LED lights?
Use an LED Dimmer switch A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
When should a 0-10V dimmer be used?
Though typically used in retail spaces, offices, and homes with dimming-compatible LED fixtures, 0-10v dimmable features are also used for outdoor commercial and residential spaces which require multipurpose lighting or ambiance. Using 0-10v Dimmers with LED Power Supplies . 0-10-volt dimmers produce varying light intensities from 10% to 100%.
What is 0-10V DC dimming?
Used as an early fluorescent dimming system and still used today, 0-10V dimming has been adapted to become a reliable LED dimming control protocol . 0-10 V is one of the earliest and simplest electronic lighting control signaling systems; simply put, the control signal is a DC voltage that varies between zero and ten volts.
What is 0-10V dimming?
0-10v dimming is a lighting control method that—on direct current voltage (DC) between 0 and 10 volts—can produce varying light intensity levels.
Do LED lights work with a dimmer?
Most LED bulbs will not dim with a dimmer because of the technology described above. Cree, however, has manufactured a 9 Watts, solid state LED bulb in an Edison base that can replace any incandescent or halogen bulb in a socket connected to a dimmer switch. This is a revolutionary new product that was designed specifically to be used with dimmers.
