How do I get auxiliary view in Solidworks?

How do I get auxiliary view in Solidworks?

To create an auxiliary view:

1. Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary.
2. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View).
3. Move the pointer until the view is where you want, then click to place the view.

How do I get an auxiliary view?

To sketch an auxiliary view, you begin with orthographic. views of the object and add projection lines perpendicular (90◦) to the slanted surface, adding a reference line any convenient distance from the view with the slanted surface.

What is an auxiliary view CAD?

An auxiliary view is one that is projected onto a plane perpendicular to one of the orthographic views and inclined in the adjacent view. A rubber-band line perpendicular to the inclined plane helps you select the center of the new viewport.

How do I crop an auxiliary view in Solidworks?

To crop a view:

1. In a drawing view, sketch a closed profile such as a circle.
2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

Can you dimension auxiliary views?

Normally, auxiliary views are projected from existing principal views. However, auxiliary views can also be drawn first and then used to create a principal view. This is done when a true measurement can only be obtained by an auxiliary view and that measurement is needed in order to create a principal view.

What is a partial auxiliary view?

17. Partial Aux views Partial auxiliary view  In auxiliary views, it is normal practice not to project hidden features or other features that are not part of the inclined surface. When only the details for the inclined surface are projected and drawn in the auxiliary view, the view is called a partial auxiliary view.

What are the 6 types of auxiliary view?

Auxiliary views are used to find: 1) true length of an inclined or oblique line; 2) true size and shape (TSS) of an inclined or oblique face 3) edge view of oblique face; 4) point view of inclined or oblique line; 5) true size and shape of features on incline or oblique faces.

What are the types of auxiliary view?

Types OF Auxiliary View:

• Primary Auxiliary Views: Such View which is perpendicular to one principal plane and makes the inclined view with the other two principal planes is called Primary Auxiliary View.
• Secondary Auxiliary Views:

How do I crop a view?

Crop a View

1. If the view is not cropped, On the View Control Bar, click (Crop View).
2. If the view is cropped, but the crop region is not visible, click (Show Crop Region) on the View Control Bar.
3. Resize the crop region as necessary by using the drag control or setting the size explicitly.

What are the three classifications of auxiliary views?

AUXILIARY VIEW CLASSIFICATIONS – A primary auxiliary view is a single view projected from one of the six principal views. – A secondary auxiliary view is a single view projected from a primary auxiliary view. – A tertiary auxiliary view is a single view projected from a secondary or another tertiary auxiliary view.

What are the six types of auxiliary views?

What are the six types of auxiliary view?

How to create an auxiliary view in SolidWorks?

Auxiliary View. An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding. In this example, to properly orient the auxiliary view, add a perpendicular relation between…

What does it mean to be a Certified Solidworks associate?

The completion of the Certified SOLIDWORKS Advanced Professional Drawing Tools (CSWPA-DT) exam proves that you have successfully demonstrated your ability to use the tools found in the SOLIDWORKS Drawing environment. As a Certified SOLIDWORKS Associate (CSWA), you will stand out from the crowd in today’s competitive job market.

Do you have to use SolidWorks for cswpa-DT?

Employers can be confident that you understand the tools and functionality found in the SOLIDWORKS Drawing environment. Note: You must use at least SOLIDWORKS 2018 for this exam. Any use of a previous version will result in the inability to open some of the testing files.

Where can I take a SolidWorks certification test?

All certification testing is done online. The process for taking a test is as follows: Step 1: Visit the appropriate exam information page above and purchase your exam by clicking on the “Buy Now” button in that page. An email with the exam procedure will be sent to you after purchase.