What are the sizes of breeze blocks?
They are produced blocks with three face dimensions: 440 x 215 mm for normal blocks, 610 x 215 mm for the new Plus Block range and 610 x 270 mm for the larger Jumbo Plus block. We are able to manufacture these blocks in a wide range of thicknesses from 100 mm up to 300 mm.
What is the size of a concrete block in mm?
Nominal size of 6″ thick concrete block or CMU/ concrete brick is about 150 × 200 × 400 in mm or 6″ × 8″ × 16″ in inch with respect to (Depth × width × Length), and their actual size is 5 5/8″ × 7 5/8″ × 15 5/8″ in inch or 141.5 × 191.5 × 391.5 in mm of full size CMU.
What is the actual size of a 200 mm concrete block?
In 1979, the industry switched to metric sized blocks based on the following dimensions – height of 200 mm, length of 400 mm, width ranging from 100 to 300 mm. After accounting for 10 mm of mortar, the actual dimensions of the blocks are 190 mm by 390 mm by between 90 and 390 mm.
How big is a block in inches?
The most common dimensions for a cinder block are approximately 8-by-8-by-16 inches. The actual measurements, however, are 7 5/8-by-7 5/8-by-15 5/8.
What are the dimensions of a standard breeze block?
Click to see full answer. In this regard, what is the size of a standard concrete block? Aggregate concrete blocks are typically available in two standard face sizes (length x height) of 440 x 215mm and 390 x 190mm. Other face sizes are available to aid manual handling.
What’s the standard size of a concrete block?
Concrete blocks, also known as concrete masonry units, cinder blocks and breeze blocks, come in a number of sizes, depending on the country of origin. Standard U.S. blocks, used throughout most of the world, are 16 inches long by 8 inches wide by 8 inches tall.
How big is a 4 inch wood block?
The blocks are available in a standard face size of 440 x 215mm and in thicknesses of 75mm, 90mm, 100mm, 140mm and 190mm in a standard finish (suitable for rendering). 100mm, 140mm and 190mm wide blocks are available in close texture finish, please CLICK HERE for more information. How long is a 4 inch block?
How big is a concrete block in New Zealand?
New Zealand standard block sizes are smaller yet, measuring 15.4 inches long by 7.5 inches tall by 7.5 inches wide. Concrete blocks are often used in combination with steel reinforcing bars to form reinforced concrete block structures used as load-bearing columns, beams and walls.