Should I lift my Jeep JK?
Why Should I Lift My Jeep? If you’re planning on doing any serious off-roading, you will want to lift your Jeep to increase ground clearance, suspension travel, and be able to fit larger tires better suited for off-roading. People also tend to lift their Wrangler because it makes it look better.
What is the best Jeep JK lift kit?
How Did We Pick the Best Lift Kit for a Jeep Wrangler?
- Rough Country 1.25-Inch Body Lift Kit.
- Teraflex 2.50-Inch Suspension Lift Kit with 9550 VSS Shocks.
- Rough Country 3.25-Inch Suspension Lift Kit with Shocks.
Does my Jeep JK have a lift?
You’ll see that the spring should measure 9 3/8″ from top to bottom. This measurement is taken while the vehicle is on the ground. Measure your spring, and anything over the 9 3/8″ will be how much lift you have. For instance, if you measure your front spring and you come up with 13 3/8″, that means you have a 4″ lift.
What is the biggest lift for a Jeep JK?
Tell us about your Wrangler Extremists rejoice, these 5 inch and up Jeep Wrangler lift kits are the biggest lifts available for the supreme off-roading Jeep Wrangler. 5 inch lift kits give your rig the ultimate articulation and huge amounts of wheel travel.
What size tires fit my Jeep JK?
The Jeep JK makes it easy to fit larger rubber with a limited amount of lifting. The JK in stock form will easily fit 32″ tires (32 was the largest tire size available from the factory).
What are the differences between the Jeep TJ and the Jeep JK?
The TJ has fog lights affixed atop the front bumper, while the JK has them built into the bumper and the grille itself. Another easy difference to spot between the TJ and the JK is the presence of the “Jeep” stamped onto the OEM bumper of the TJ.
How high should I Lift my Jeep?
The average lift kit will raise your Jeep between one and 3 inches. However, there are kits and modifications that can lift your vehicle even higher. If you are going to lift higher than 3 inches, you are going to spend more money on modifications in order to provide you with suspension and stability.
How do you lift a jeep?
Lift the Jeep up from the axle until the weight is off the jack stands. Remove the stands from under the axle tube, and lift the stands under the frame as high as possible. Drop the Jeep down on the frame, and allow the axle to drop to full droop. Use channel locks to pull the jounce bumper out of the cup on each side.
https://www.youtube.com/watch?v=eeFJYPipUjY
