How do you use Sena 20S?

Turn on the 20S and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps.
Search for Bluetooth devices on your mobile phone.
Enter 0000 for the PIN.
The mobile phone confirms that pairing has completed and the 20S is ready to use.

What is the difference between Sena 20S and 20S EVO?

The 20S EVO was redesigned with a fixed type, shark fin antenna as opposed to the flip up antenna of the original 20S. This sleek new antenna design improves upon motorcycle group intercom stability and distance, while updates to the hardware allow for a more robust general performance.

Is the Sena 20S waterproof?

They are water resistant. I’ve ridden for hours and hours in the rain with mine, to no ill effect. Waterproof, they are not. You can’t submerge them to x feet for y hours.

What kind of technology does Sena 20s Evo have?

Sena 20S EVO Audio Multitasking™ technology allows you to have motorcycle helmet intercom conversation while simultaneously listening to music, FM radio, or GPS.

Do you need Bluetooth to use Sena 20s?

The Bluetooth audio device must be paired with the 20S by following the “Bluetooth Stereo Device Pairing” procedures. The 20S supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the 20S to remotely control music playback.

How do I set up remote control on Sena 20s?

1. Power on the 20S. 2. Power on the Handlebar Remote by tapping the Front Button once. 3. On the 20S, hold down the Jog Dial for 12 seconds until you hear the voice prompt say “Configuration Menu”. 4. Rotate the Jog Dial clockwise or counter-clockwise to cycle through the settings until you get to “Remote Control Pairing”.

How does the battery indicator work on Sena 20?

When the headset is powering on, the red LED flashes rapidly indicating the battery level. When you power on the headset, keep pressing the Jog Dial and the Phone Button simultaneously for about 3 seconds until you hear three, high toned beeps. Then you will hear voice prompt indicating the battery level.