How do you reset a rocket M5?
Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the Rocket is already powered on. Power The Power LED will light green when the device is connected to a power source.
What is Ubiquiti Rocket M5?
The Ubiquiti Rocket M5 MIMO is a 5GHz MIMO Point-to-Point wireless bridge/ base station. It has excellent features including 50+km range performance and breakthrough speed (150+Mbps real TCP/IP). It is a rugged, hi-power, linear, 2×2 MIMO radio with enhanced receiver performance.
How do I program my Ubiquiti radio?
Connect your computer’s Ethernet port to the LAN port of the same power injector. Once connected, launch your web browser and enter 192.168. 1.20 as the “URL” to gain access to the radio’s management console. Enter ubnt / ubnt for the username / password.
Where do I enter my UBNT for nanostationm?
Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. Launch your web browser and type https://192.168.1.20 in the address field. Press enter (PC) or return (Mac). Enter ubnt in the Username and Password fields. Select your Country and Language.
How to change Ethernet port on rocketm5 GPS?
1. Remove the Port Coverby lifting the release latch on the bottom of the RocketM5 GPS and sliding the Port Coveroff. 5 Hardware Installation 2. Connect an Ethernet cable to the Primary Ethernet Port. 3. If you need to connect the Secondary Ethernet Port, then do so at this time. Replace the Port Cover.
How does the Ubiquiti rocket M radio work?
Featuring enhanced radio performance and mix-and-match industrial design, the Rocket ™ M is ideal for deployment in Point-to-Point (PtP) bridging or Point-to-MultiPoint (PtMP) applications. Rocket ™ radios seamlessly work together with airMAX ® Sector, RocketDish ™, Omni and Yagi antennas for PtP and PtMP links.
How to start lbe-m5-23 Quick Start Guide?
Verify connectivity in the airOS Configuration Interface. Make sure that your host system is connected via Ethernet to the device. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. Launch your web browser and type https://192.168.1.20 in the address field.
