How can I make my Asus Eee PC faster?

How to Speed Up an Asus EEE PC

Adding RAM. As with virtually any other type of computing device, adding more RAM to your EEE PC is perhaps the easiest and most effective way to improve its performance.
Right-clocking/Overclocking the CPU.
Crank Up the Video.
Disable Unneeded Windows Services.
Ditch Windows Altogether.

What is the RAM of Asus Eee PC?

Most early Eee PCs use 533/667 MHz DDR2 SDRAM via a standard SO-DIMM module, which can be swapped out. The 700 and 701SDX have RAM soldered to the motherboard.

How do I update my Asus Eee PC BIOS?

Upgrading the BIOS (Firmware) of your Eee

Prepare an USB drive formatted with FAT16 filesystem. Note that a SD card won’t work, unless you insert it in an USB card reader.
Open the downloaded file. It should contain a file named like 701-ASUS-0801.
Reboot and press Alt+F2 during the boot.

How to upgrade memory in an Asus Eee PC?

For 2GB modules, click on “Diagnostic Tools” instead and verify “* RAM Size” reports “2048 MB” (2GB). Replace the memory cover by snapping it into place and reinserting the screws. If you’ve installed 2GB of RAM into an Eee PC running the default Xandros Linux operating system, now is the time to rebuild the kernel.

How much memory does the Asus Eee PC 1005ha take?

The ASUS Eee PC 1005HA (Seashell) Laptop takes the PC2-5300 DDR2-667 200pin SDRAM SODIMM memory type, and comes installed with 1GB memory. How much memory does the ASUS Eee PC 1005HA (Seashell) Laptop take?

What kind of memory do I need for my Eee PC?

Upgrade that stock 512MB memory module with a 1 or 2GB module. Here’s a quick and easy guide on how to upgrade the memory inside your 700 series (4G or 8G) Eee PC . Purchase the right memory. Search for standard, DDR2 laptop memory modules (not desktop memory), which will have 200-pin edge connectors.

How do I restart my Asus Eee PC?

Restart your Eee PC. Make sure you enter the “Rescue Mode” this time. Repeatedly press F9 after seeing the first screen, then select “Rescue Mode” or the name you selected in the first step. Type these commands at the pound # sign prompt, pressing ↵ Enter after each one.