Why does my turntable sound distorted?
If, for example, your turntable has a built-in phono stage and is then connected to the PHONO input on your amplifier, that signal boost happens twice, leaving you with an extremely loud, distorted sound. If you’re still getting distorted sound, it’s worth checking that you’ve got the right tracking force set too.
Why does my record player sound wrong?
An old or worn stylus will cause your records to sound bad or sound scratchy. This is because a worn stylus is getting down to the bottom of the record groove where there is no music. The music resides on the sides of the record groove and is where a new stylus (needle) sits while playing.
Why does my record player keep stopping?
A common reason your records may skip is dust and dirt that gets into the grooves. While it may occur on old records due to storage, paper sleeves or dust in the environment, new records may also have dust or dirt. You want to remove any dust or dirt from the record before playing it to prevent skipping.
Are belt driven turntables reliable?
Belt drive turntables, reportedly, produce better sound quality. Because a belt drive reduces vibration noise, a record player’s sound can be cleaner. Many record player owners, in fact, focus on motor noise reduction as a priority. The more a record player’s feedback noise is reduced, the clearer its noise is.
Why is there a belt drive on a turntable?
The design of the belt-drive turntable allows the use of a less expensive motor than the direct-drive turntable. Also, the elastomeric belt absorbs motor vibrations which would otherwise be picked up by the stylus .
What to do if your turntable is running too low?
If the belt is running too low on the pulley, you will need to lift the platter off the centre spindle and slip the belt up the drive hub a few millimetres. Refit the platter and stretch the belt over the motor pulley, taking care to route it through the prongs of the speed changer arm.
Can a direct drive turntable have cogging?
Direct drive turntable motors can exhibit cogging the amount of this cogging is determined by the pole number and the inertia (weight) of the platter. Hunting can be a problem if the feedback servo is lacking in definition. Direct drive motors do not use an oil well bearing.
What does direct drive mean on a turntable?
The direct drive motor: The name indicates the absence of isolation from the motor to the platter. Direct drive turntable motors can exhibit cogging the amount of this cogging is determined by the pole number and the inertia (weight) of the platter. Hunting can be a problem if the feedback servo is lacking in definition.
