How do you reset the service light on a Audi TT?

How do you reset the service light on a Audi TT?

HOW TO RESET: AUDI TT

1. Turn ignition off.
2. Turn ignition on while pressing trip recorder RESET BUTTON (A).
3. Press and hold (B BUTTON) on left side of instrument cluster display until “SERVICE!” is cleared from the display or SERVICE 9300 MI is displayed.
4. Release the Button, the system will display OK.
5. Turn Ignition OFF.

How do you reset the service light on a 2008 Audi TT?

2008-2015

1. Start the engine.
2. Press the CAR button to get to the service menu.
3. From there use the bottom left button on the MMI Controller to CAR SYSTEMS.
4. Scroll to and select SERVICE & CHECKS from the CAR SYSTEMS menu.
5. Select SERVICE INTERVALS.
6. Select RESET OIL CHANGE INTERVAL and confirm.

How do you turn off the service light on a Audi TT mk2?

Press and hold the button on the left of the display until it shows SERVICE IN xxxx Miles / Kilometres. Release the left button, then turn off the ignition.

How do you reset the service light on a 2010 Audi TT?

Follow the instructions below to reset the Oil Change Light on your Audi TT:

1. Turn the ignition switch to the ON position.
2. There are two knobs in the instrument cluster, pull out the RIGHT knob once and then release it to activate the reset mode.
3. Pull out the RIGHT knob again until the Oil Change in.

Where is the OBD port on Audi TT?

OBD connector location for Audi TT (8N) (1998 – 2006)

1. OBD connector is under the steering wheel (door side)
2. OBD connector is located above the footrest.
3. OBD2 Socket.

How do you reset the check engine light on a 2001 Audi TT?

There is no “reset” button for the Check Engine Light (CEL). Here is a MIL fact sheet that will better help you understand the system as well as instruct you how to turn it off. In particular, check your fuel filler cap to see if it is there and tight.

How do you reset the check engine light on an Audi A4?

Audi A4 B8: How to Reset Check Engine Light

1. Step 1 – Locate your battery.
2. Step 2 – Remove negative terminal.
3. Step 3 – Refit negative terminal and start car.

How do you reset the check engine light on a Audi q5?

Disconnect the battery In some cars, especially those made before the mid-1990s, you can reset the check engine light by disconnecting the battery. Newer vehicles have a feature that will simply turn the light back on after the battery is reconnected if the car is not drained of electricity properly, however.

How to reset service light on Audi TT?

Release the button on the right SERVICE should now appear on the display. Press and hold the button on the left of the display until it shows SERVICE IN xxxx Miles / Kilometres. Release the left button, then turn off the ignition. . If you like to reset any maintenance oil light after an oil change.

How to reset the oil on a Porsche?

Scroll with up and down arrow keys to highlight Oil Reset With One Button from the Oil Reset menu. An Information screen displays. Press the function key OK to continue or Cancel key to return to the Oil Reset menu Follow on-screen instruction and send a command to reset oil service.

How long does it take for a service reset on an Audi?

The system requires a certain time/distance to calibrate itself to show meaningful values, usually this takes about 300 miles or 500 km. In many newer Audi models (2008 onward), the default “Simple Service Reset” or “Basic Service Reset” choice cannot be used.

How to reset 2015 Audi Q3 service due light?

Start the engine. Press the CAR button to get to the service menu. From there use the bottom left button on the MMI Controller to CAR SYSTEMS. Scroll to and select SERVICE & CHECKS from the CAR SYSTEMS menu. Select SERVICE INTERVALS. Select RESET OIL CHANGE INTERVAL and confirm. Turn off the ignition and restart to confirm reset is completed.