What would cause my low beam headlights not to work?

What would cause my low beam headlights not to work?

Most total headlight failures are caused by a bad component like a fuse, relay, or module. High beam headlights don’t work or low beams don’t work. The cause: A burned out bulb, or a problem with the high beam switch or relay. The fix: Replace the bulb, switch, or relay.

Where is the headlight fuse on a 2003 GMC Envoy?

The fuse block is located under the hood in the engine compartment on the driver’s side of the vehicle.

How do you fix low beam headlights not working?

4 Steps to Fix a Low Beam Headlight Bulb

1. Find the blown out bulb.
2. Buy the replacement bulb.
3. Get your tools ready.
4. Disconnect the negative terminal on the battery.
5. Remove the trim pieces.
6. Find the headlight holder.
7. Disconnect the cables from the headlight.
8. Remove the headlight bulb from the bulb housing.

How do I know if my low beam relay is bad?

Have an assistant turn on the headlights. If you hear the relay click, you know the coil is working, but you don’t know about the contacts. If you don’t hear the click, your relay is probably bad. The safest way to test a headlight relay is to replace it with a known good one.

Why are my GMC Envoy Trailblazer headlights not working?

2002-2009 GMC EVOY and Chevy TRAILBLAZERS have a common problem with the headlamp relay causing low beam headlight failure. This video is just a quick tip for anyone who may be experiencing this problem. Thank you for watching! please like and subscribe! Loading…

Why are my low beam headlights not working?

If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams.

What to do with a 2004 GMC Envoy?

This 2004 GMC Envoy came in with the passenger side low beam not working. This repair applies generally to Envoys, Bravadas and Trailblazers, with only slight differences in the headlight assembly removal. Some require removing the grill assembly.

What to do if your low beams don’t work?

Either way, if your low beams aren’t working but your high beams are, the first things we check are the bulbs. If you’re thinking of replacing the headlight bulbs yourself, make sure you’re familiar with the correct installation procedure for the type of bulb you’re replacing.