What is a cut roof?
A traditional cut roof is exactly what it says on the tin, it is a roof where all elements are cut on site and tailored to each individual roof. The overall construction of a cut roof is to ensure the load imposed on it is evenly transmitted to the bearing points below.
What is cut Rafter roofing?
A cut roof In simple terms this type of roof consists of rafters and joists. The joists prevent the outward spread of the rafters/walls, and conveniently give support for the ceiling below. The wider the gap between the rafters, the thicker the rafter and lath timbers need to be.
What is a purlin cut roof?
Purlin roofs are more commonly used as a roof structure in Victorian and Edwardian houses. This roof type consists of a horizontal beam(Purlin) running in-between the Galbe ends at the slope of the roof. You will find that Purlin’s are placed directly between the ridge beam at the top of the roof and the eaves.
Is a truss roof cheaper than a cut roof?
When looking at the price differential of trussed rafters and loose timbers, a truss solution, although using smaller timber sections will generally, for the supply element, be slightly more expensive. On the majority of structures, a Trussed Rafter roof will be more affordable than a site cut roof.
Can you cut metal roofing with a grinder?
As a novice, a good alternative for the circular saw is the angle grinder. You can also get the work done while using an angle grinder. However, it is not the most recommended tool to use in cutting metal roofing. Because metal roofing is usually thin enough to be cut using safer tools like the shears.
How do you cut a hole in a corrugated roof?
Punch a hole through the metal using a cold chisel and mallet or drill through with a heavy-duty drill with a bit that is rated for metal. Make the incision large enough to admit the Sawzall blade. If you do not have a Sawzall or other saw that will safely cut metal, use a pair of heavy-duty tin snips.
What components are needed to construct a cut roof?
This type of roof consists of rafters and joists. The joists prevent the outward spread of the rafters/walls, and conveniently give support for the ceiling below. The rafters are the main load bearing elements of the roof.
