How do I calculate how much flagstone I need?
Multiply the length by the width to find the area of the space to be covered with stone. If the length of the patio was 8.5 feet and the width was 7.75, you’d multiply those numbers to come to 65.88 square feet. To account for sizing and waste, add 10 to 15 percent to your square footage.
How many sq ft does a ton of flagstone cover?
70 to 140 square feet
A ton of flagstone can cover 70 to 140 square feet, depending on the type of stone. Minimum – A lower priced flagstone, such as Oklahoma Brown, costs around $200 per ton. Average – A mid-range material costs from $350 to $500 per ton.
How much will a ton of 2 flagstone cover?
From the chart, we know that one ton of 2” thick flagstone covers about 80 square feet.
How do you calculate stone coverage?
Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.
How much area does a pallet of flagstone cover?
120-140 square feet
A pallet of 1-1/2″ thick holds approx. 120-140 square feet of stone.
How thick should a flagstone patio be?
The stones should be at least 1 1/2 inches thick for strength; 2 inches thick is better. Note that “flagstone” merely describes the stones’ wide, flat shape; flagstone comes in many different types of stone.
What is the best base for a flagstone patio?
It is recommended that a patio or walkway base be at least 3” deep, then filled with a layer of compacted gravel covered with coarse sand. The flagstones are then placed in the desired pattern, starting at the perimeter and working inward.
Is flagstone more expensive than pavers?
On average, yes, flagstone costs around $2 to $3 per square foot while pavers range from $3 to $6. However, in the end, the flagstone flooring project costs more than pavers. The overall material costs a bit more, and the labor to install it’s pricy too.
How to estimate the amount of flagstone you need?
If you chose to use 2-inch thick stone in the example, you would divide the square footage needed by the coverage in the above guide: 75.76/100 = .7576. Multiply that number by 2000 to get the amount of stone needed: 1,515 pounds of flagstone. Chrissie Reinhart has written for various websites including eHow and “Notafied Magazine.”
How big is a ton of flagstone rock?
Material Coverage Conversion Chart Material Category Area Per Ton Coverage Flagstone coverage 120 sq. ft. per ton up to 1″ – 1 1/2″ th Flagstone coverage 80 sq. ft. per ton up to 2″ – 2 1/4″ thi 2″ – 4″ rock coverage 60 sq. ft. per ton 4″ – 8″ rock coverage 40 sq. ft. per ton
How much coverage does a ton of rock have?
Material Coverage Conversion Chart Material Category Area Per Ton Coverage 4″ – 8″ rock coverage 40 sq. ft. per ton 4″ strip stone coverage 55 sq. ft. per ton 8″ wall rock coverage 20 sq. ft. per ton
How big of a patio do you need with flagstone?
Multiply the length by the width to find the area of the space to be covered with stone. If the length of the patio was 8.5 feet and the width was 7.75, you’d multiply those numbers to come to 65.88 square feet.
