How do you clear the CMOS on a Gigabyte motherboard?

How do you clear the CMOS on a Gigabyte motherboard?

If there is no CLR_CMOS jumpers or [CMOS_SW] button on the motherboard, please follow the steps to clear CMOS:

1. Take out the battery gently and put it aside for about 10 minutes or longer.
2. Re-insert the battery to the battery holder.
3. Connect power cord to MB again and turn on power.

How do I reset my Gigabyte motherboard BIOS?

Open the computer case and locate the 3-pin jumper on the motherboard near the power supply, typically labeled “clear cmos” or “reset bios.” Remove the jumper from the default position, which is typically connecting the 1st and 2nd pins. Wait one minute.

What does a CMOS reset do?

Clearing the CMOS resets your BIOS settings back to their factory default state. In most cases, you can clear the CMOS from within the BIOS menu. In some cases, you may have to open your computer’s case.

How can I restore the BIOS on a gigabyte motherboard?

Restore the BIOS on a Gigabyte motherboard by resetting the CMOS memory to the default condition. If the computer boots, but you are not able to access the BIOS, you can reset the CMOS memory by removing the battery, moving a jumper on the motherboard or debugging through Windows. Reset CMOS Memory Using the Jumper Power down the PC.

How to clear CMOS on gigabyte motherboard?

How to CLEAR CMOS? 1 If your motherboard is equipped with Clear CMOS button then press it. 2 If your motherboard has CLR_CMOS (Clearing CMOS) jumper then place a jumper cap on the two pins to temporarily short… 3 If above methods fail then you need to remove the CMOS battery (small silver disk) and then use method 2) and… More

How can I reset the CMOS memory on my computer?

If the computer boots, but you are not able to access the BIOS, you can reset the CMOS memory by removing the battery, moving a jumper on the motherboard or debugging through Windows. Power down the PC. Locate the rocker-style switch at the back of the PC, if applicable, and switch it to the off position (O).

What’s the best way to reset a gigabyte?

Wait for 10 seconds. Press and hold PC Power On button and then turn on the power supply. Release the PC Power On button once the PC starts. Shut off the power supply as quickly as possible thereafter. Shut off the power supply (by turning off the main switch).