Is higher or lower Cl better?
The lower the CAS latency, the better. It’s important to note that two different RAM kits with the same data transfer rate, for example DDR4-3200, can have different CAS timings. Take the Team Group Delta Tuf Gaming RGB DDR4-3200 and G. Skill Trident Z Royal DDR4-3200.
What is a good CL for RAM?
The basic best choice for RAM, based on speed and capacity, would be a 16GB or 32GB set at 3,200MHz for Intel processors, or 3,600MHz for AMD’s latest CPUs. Either should be set right with that choice. And remember it’s probably overkill pairing over 5,000MHz of RAM with an Intel CPU.
What does CL mean on memory?
latency
Column Address Strobe (CAS) latency, or CL, is the delay in clock cycles between the READ command and the moment data is available. In asynchronous DRAM, the interval is specified in nanoseconds (absolute time). In synchronous DRAM, the interval is specified in clock cycles.
Is lower memory latency good?
Even under low performance, since there is half the latency, it means it is performing similar to the higher latency but also higher speed. So in other words, a higher clock cycle and a shorter latency mean good performance.
Which is better Cl or MHz in memory?
CL ratings are not directly comparable unless using the same MHz memory. For example, CL8 is has lower latency than CL11 when comparing 1600MHz modules. But 1600MHz CL8 has higher latency than 2400MHz CL11. CL is the number of clock ticks before an operation occurs.
What’s the difference between CL16 and cl18 memory?
The RAM with 3600 MHz technically higher latency (18 vs 16 clock cycles ). But the important part is that they are measured in clock cycles and a clock cycle at higher frequency is shorter so in reality they actually have the same absolute latency (measured in nanoseconds).
What does the CL mean in RAM timings?
CL Timings Explained When buying RAM, you’ll see listings for their timings, such as CL16-18-18-38 or CL14-14-14-34 or CL 16-18-18-36. That number after the “CL” represents the RAM kit’s CAS latency, sometimes called CL. But what does CAS latency really mean? And what implications does a RAM kit’s CAS latency have for its performance?
Which is better lower latency or higher CL ratio?
Lower latency assures the processing of data in minimal time. Sametime, its recommended to do not mix RAM with different clock speeds or different CL ratios. Otherwise, such RAM modules will not be able to work at their specified speed. For example, we have two RAM modules with following specification.
