Can you cast 316L stainless steel?
Type 316 stainless steel is an austenitic stainless steel that differs with grade 304 through the addition of molybdenum, which increases its resistance to chemical corrosion and marine environments. 316 stainless steel alloy is ideal for casting components especially for marine application.
What is 316L stainless steel made of?
Chemical Composition of 316 and 316L Stainless Steel Plate 316 and 316L stainless steel plate both are composed of no more than 2.0% manganese, 0.75% silicon and 0.045% phosphorous. Both 316 and 316L contain at most 0.03% sulfur, between 16.00% and 18.00% chromium, and between 2.0% and 3.0% molybdenum.
What makes stainless steel attractive?
The chromium and molybdenum content is high, with 22% to 25%, and up to 5%, respectively, with very low nickel content. The duplex structure gives the stainless steel many desirable properties.
Can you mold stainless steel?
Mold will not grow on stainless steel. Food spills and other material on a stainless steel surface can cause mold to grow. Follow the same recommended cleaning suggestions to remove mold growth. Do not use bleach to clean mold.
When to use annealing on 316 stainless steel?
Annealing, or heat treating, can be done between 1,900 – 2,100°F (1,038 to 1,149°C), and is commonly used to restore corrosion resistance in heavily welded 316 materials. We are suppliers of 316 stainless steel sheet, coil, and 316 round bar, available in normal and 316L grades.
What kind of stainless steel is 316 or 316L?
316 / 316L are austenitic stainless steels that contain molybdenum, which increases their resistance to many chemical corrodents and marine environments. 316L is an extra low carbon version of 316 stainless steel.
Why is AISI 316 stainless steel more difficult to process?
AISI 316 stainless steel (SS316) has higher strength and higher work hardening rate than carbon steel and low alloy steel, so it is more difficult to process. Therefore, greater power and lower processing speeds are required, which may result in shortened tool life and difficulty in obtaining a smooth surface.
Is the alloy 316 / 316L subject to chip breaking?
Alloy 316/316L is subject to work hardening during deformation and is subject to chip breaking. The best machining results are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.
