How do I change the time on my Acroprint atr120?

How do I change the time on my Acroprint atr120?

Setting the Time Manually

1. Enter the programming mode by setting the program switch on the back of the clock to the PRO position.
2. Press button one once to start setting the current time.
3. Press button four to set the hours (24-hour format; 0-23 with 0 = midnight).
4. Press button five to set the minutes.

How do I change the time on my Acroprint es700?

1. Unlock the key and remove the top case.
2. Remove the PROTECTION PAD.
3. Plug the AC cord into the AC outlet.
4. Replace the cover and lock.
5. Press the SELECT button and position the under the “TIME” mark.
6. Ex: Set the time from 10:08 to 10:09.
7. Press the SELECT button, and position the under the “DATE”.

How does the minute drive cam work on an acroprint?

The motor rotates the minute drive cam one revolution each minute. Accuracy of the recorder is based on the line frequency provided all the drive train parts are properly installed, adjusted and lubricated. These parts should be checked for wear and replaced as necessary.

How to repair acroprint Model 125 day date and hour?

Due to the complexity of the Typehead we recommend replacing the Typehead Assembly instead of attempting repair in the field. Loosen the two set screws in the Day-Date and Hour Ratchets. Remove the E-Clip from the Detent Stud and remove the ratchets. Disconnect the Detent Spring from Detent Pawl and remove Detent Pawl.

How to fix a left print acroprint recorder?

If the recorder is a left print model (for left side of card registrations) an Intermediate Gear is fixed over the Minute Drive Wheel and should be carefully engaged so that it only engages the Minute Drive Wheel and not the Minute Drive Gear. A. Removing the Typehead Assembly

What kind of motor does a time recorder use?

The time recorders are driven by a 115volt AC, 60 cycle, 1rpm motor (240 volt AC, 50 cycles units are also available by request). The motor rotates the minute drive cam one revolution each minute. Accuracy of the recorder is based on the line frequency provided all the drive train parts are properly installed, adjusted and lubricated.