What is the purpose of a half brick placed in a brickwork bond?
All bricks in this bond are stretchers, with the bricks in each successive course staggered by half a stretcher. Headers are used as quoins on alternating stretching courses in order to achieve the necessary off-set. It is the simplest repeating pattern, and will create a wall one header thick.
Why do we need brick bonding?
Bonding is the industry term that’s given to the pattern in which the bricks are laid. Whilst the primary purpose of a bond is to ensure the brickwork is strong and stable, it can also have a dramatic effect on the visual appearance of a wall.
Which type of bond is used for making half brick wall?
stretcher bond
For half brick thickness leaves, stretcher bond is provided. And for one brick thickness or more thickness, English bond or Flemish bonds type constructions are provided. While laying bricks, care should be taken without filling the cavity with cement mortar.
What is needed for good bonding in brick?
The bricks should be of uniform size. The length of the brick should be twice its width plus one joint, so that uniform lap is obtained. Good bond is not possible if lap is non-uniform.
Which is the easiest type of brick bond?
Also known as running bonds, stretcher bond is made when bricks are placed with only their stretchers visible, overlapping halfway with the courses of bricks above and below. The bond is certainly the easiest to make since it only uses stretchers, making it one of the most common types of bricks bonds in many parts of the world.
When to use brickwork bond with recycled bricks?
This brickwork bond is recommended/proper bond when laying or gluing facing bricks that are characterised by a low dimensional stability. When using recycled bricks you sometimes have no other choice. An elegant and often used bond with a simpler pattern. All the courses consist consecutively of a header and two stretchers.
How are the joints of a brick bond staggered?
A variation on the stretcher bond. The vertical joints are staggered each time by a quarter or three-quarters of the brick’s length. Aesthetically this gives a descending movement to the bond. This can even be carried out to the left and to the right. At a certain height you change the direction in order to break the long bonds of slanting bricks.
Why are half bricks used to build walls?
This bond ensures attractive appearance and full strength to the walls. In walls having their thickness equal to odd number of half bricks, bats are essentially used to achieve the bond. This type of bond is best suited from considerations of economy and appearance. Mortar is used as a joining medium in brick and stone construction.
