What is F30 stove?
The 3 parts that can trigger this code are the oven temperature sensor probe, a wiring harness or the electronic oven control board. Specifically, the F30 code indicates the probe could be broken or unplugged or its wires could be broken or damaged.
How do I turn off F10 on my Kenmore oven?
If you see an F10 error code, reset the control board by unplugging the range’s power cord and tripping the relevant breaker switch. Wait one minute, restore power, and then run a test by reheating the oven.
What does F30 mean on Kenmore Elite range?
Hello Kathy. That F30 on your range indicates that the control detects an “open” oven temperature sensor probe circuit. That circuit is traced in purple on the wiring diagram in the image below. According that wiring diagram, it shows that your sensor circuit has 2 thermal circuit breakers in that harness.
What to do if temperature sensor is bad on Kenmore F30?
Check the wiring from the sensor to the sensor plug at the main control board and make sure its good. Check the resistance of the temperature sensor with an ohm meter if the sensor shows under 500 ohms at room temperature its bad.
What does F30 mean on a Frigidaire Range?
For Kenmore and Frigidaire ranges like this one, these codes mean that the control detects a problem with the oven temperature sensor probe. The 3 parts that can trigger this code are the oven temperature sensor probe, a wiring harness or the electronic oven control board.
Why do I get a F30 code on my oven?
If the multimeter doesn’t measure near 1,080 ohms through the purple sensor wires that connect to the electronic oven control board, a broken oven temperature sensor probe or a wiring failure is causing the F30 or F31 code. Let’s check the sensor first. Unplug the sensor from the wire harness and check the sensor resistance.
