What is companion switches?
The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. Up to 9 companion switches can be linked to a Maestro or Maestro wireless switch, for a total of 10 areas of control.
What is a Lutron accessory switch?
Product Overview. The Maestro companion switch is designed to complement a Maestro switch. The easy-to-operate tap switch turns lights on and off. Maestro accessories provide light control convenience for hallways, stairways or any room with multiple switch controls.
Where do I find my Lutron model number?
With Lutron dimmers/ switches the model number can be located on the side of the device on a white label. If you are unable to find the white label on the side of the dimmer, there are a select few devices where the model number would be stamped on the front of the yoke.
Are Lutron Maestro smart switches?
Smart home lighting has been around for awhile now, and Lutron was one of the first to offer smart automated lighting to residential homes. Both Caseta and Maestro wireless systems use the Lutron Clear Connect technology to offer an enjoyable user experience with its remote control of switches and dimmers.
Is there a 4 way motion sensor switch?
You cannot replace a 4-way switch with the sensor you have. The sensor you are using can either function as a 2-way or 3-way switch, it does not function as a 4-way switch. This is what a typical 4-way circuit looks like. Notice there are two 3-way switches (on the ends), and a single 4-way switch (in the middle).
Does a motion sensor need to be grounded?
The device you’re using (MS-OPS5M-XX) requires a ground to operate, according to the documentation.
How does a companion dimmer work?
The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. The easy-to-operate tap switch turns lights on and off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off.
What is the difference between Lutron Diva and Maestro?
The differences are really in user interface and aesthetics. The Diva will have a toggle button for on and off, and the Maestro has a push button. The Diva has a slider for dimming, and the Maestro uses a push button rocker for dimming.
Can you put 2 motion sensor on a three way switch?
When using in a 3-way application use one sensor and one standard 3-way switch. Cannot be used with another sensor, or in a 4-way application. WARNINGS AND CAUTIONS: If you are not sure about any part of these instructions, consult an electrician.
How does the Lutron Maestro dimmer switch work?
The easy-to-operate tap switch turns lights on/off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off. Delayed fade-to-off gives you 10-60 seconds to leave the room or get into bed before the lights go out.
How long does the Maestro timer on Lutron work?
The Maestro countdown timer by Lutron is the ideal energy-saving control for any room with an exhaust fan or light. Set the timer to turn off your fan or lights automatically after five to 60 minutes.
Can a maestro dual dimmer be used with a halogen bulb?
The Maestro Dual Dimmer is a great replacement for stacked switches commonly found in kitchens and bathrooms. It combines the function of two dimmers in one control, but is still packed with all of Maestro’s smart features. This dual dimmer can be used with 300 Watts of incandescent/halogen bulbs only on both the top and bottom loads.
How many amps does a Lutron fan need?
Upon calling Lutron tech support (which was mediocre at best), I was told that the switch has a minimum load requirement of 3 amps. Panasonic fans are very efficient and draw less than that (about 2.3 amps).
