How close should spoke lengths be?
For most folks, too long or two short really doesn’t matter as long as it’s within about 2 mm, so just round to whichever stock size is closest to ideal. If you go beyond the 2 mm, it is better to be a little short than long.
How do you measure spoke length for offset rims?
Asymmetric rims (rims with an offset spoke bed [OSB]) The Easy Way: Calculate spoke length as if the rim were symmetrical. Then add 1mm to the right side and subtract 1mm from the left side on rear wheels, or add 1mm to the disc side and subtract 1mm from the non-disc side of front wheels.
Are my spokes too long?
Spokes too long is non a issue unless they bottom out in the nipple. Since you own them, try the build. 1-2 extra will usually get by just fine if you measured to the nipple slot.
What is bike Hub width?
Some standard spacings:
| 70 mm | Birdy, Breezer Itzy front hub. |
|---|---|
| 91 mm | Low-end front hubs. |
| 96 mm | Older front hubs, especially French. |
| 100 mm | Modern front hubs. |
| 110 mm | Rear older track, coaster brake and other single-speed hubs. Also, front hubs for Downhill bikes with 20 mm axles. |
How to calculate spoke length on a bike?
Spoke Calculator UBI’s spoke calculator calculates spoke lengths for ONE SIDE of the wheel at a time. To calculate spoke lengths for the second side of the wheel, re-enter data fields for: Hub Flange Diameter, Hub Center to Flange Center, and Cross Pattern. Then click Calculate again.
Which is the best spoke hub calculator to use?
If you are using DT Swiss Straight pull hubs, you can use the DT Swiss spoke calculator which has their SP hub measurements preloaded. Double checking effective rim diameter (ERD). You can measure your rims exact ERD if you prefer, but we have not been burned by our methods described above. Still unsure what length of spoke you need?
How do you calculate spoke length on UBI?
UBI’s spoke calculator calculates spoke lengths for ONE SIDE of the wheel at a time. To calculate spoke lengths for the second side of the wheel, re-enter data fields for: Hub Flange Diameter, Hub Center to Flange Center, and Cross Pattern. Then click Calculate again. This will produce accurate spoke lengths for the second side.
Is the spoke calculator on Pro wheel builder accurate?
It is provided on an “AS IS” and “WITH ALL FAULTS” basis only. Pro Wheel Builder has made a reasonable effort to ensure the accuracy of data used in the component database.
